Sublimation Pillow

Pillow for sublimation

High-quality cover made of 100% polyester, suitable for SUBLIMATION printing. Printing is possible on both sides of the cover.

The pillow is pleasant to the touch. You can also print it with other printing techniques such as screen printing, transfers or with textile foils.

For the best print quality, we recommend using SAWGRASS cartridges and TRUE PIX paper.

SPECIFICATION:

> pillow size 42 x 42 cm or 35 x 35 cm

> 100% polyester

> invisible zipper

> possibility of sublimation or printing on both sides

> printing possibilities: sublimation, printing with textile foils, screen printing, embroidery…

Pillow covers suitable for SUBLIMATION printing

Available in two sizes, 42 x 42 cm or 35 x 35 cm

For the best print quality, we recommend using SAWGRASS cartridges and TRUE PIX paper.

Sublimation printing process:

> set the press to 200° and 60s, medium to high pressure

> insert protective paper into the cover to prevent the print from showing on the other side

> place the cover on the press

> smooth it well to remove all wrinkles

> preheat the cover for about 10s to remove excess moisture and smooth the fabric

> place the transfer on the pillow and protect with paper

> press

> CAUTION! the surface is very hot, be careful to avoid burns, use protective gear