AVANTEX TRANSPARENT 3D BASE – layer effect
AVANTEX CLEAR BASE 3D FOR HIGH THICKNESS EFFECT KG.1
Transparent base for 3D printing layer effect, where the edges of the color after printing are clean and sharp. Suitable for use in combination with plastisol colors.
To achieve the right effect, the screen should be exposed with thick-layer emulsion or thicker capillary film (min. 400 mic.).
Recommended mesh density: 32 – 43 threads/cm
Additive for 3D base: R10 to achieve puff effect (use 10-15%).
IMPORTANT: Always test wash durability on a test print before serial printing.