PLASTISOL INK AVANTEX

PLASTISOL AVANTEX -ink for screen printing

AVANTEX plastisol ink for direct screen printing on textiles (T-shirts, cotton bags, etc.), with excellent coverage and a matte satin effect after printing.

AVANTEX plastisol ink must be applied at higher temperatures. It is recommended to set – polymerize in an owen at 150-160°C, 2 minutes. If we want a glossy effect of the printed color, a thicker application and fixing above 160°C are necessary.
Excellent coverage and durability are achieved with Avantex plastisol ink in screen printing on both light and dark fabrics. Plastisol ink can be used for cotton fabrics, jersey, plush, and more demanding fabrics such as denim, canvas, synthetic blends, suede, technical fabrics, etc.
Composition: Plastisol ink Avantex is compliant with Oekotex and does not contain phthalates.
Avantex plastisol ink is compatible and usable for direct screen printing on textiles and for transfer print.

Characteristics:

• high coverage
• innovative final matte effect
• prints nicely – just the right viscosity for printing right out of the container.

Preparation of the ink for use:

• The ink is already ready for printing, so you simply take it out of the container and print. If you feel the viscosity is too high, just mix the ink.
• The ink is single-component.
• The Avantex plastisol ink line is available with a complete mixing system matching colors by the Pantone color scale. Pantone1. It is available in PDF format, which allows easy daily access.

Special ink:

AVANTEX CLEAR SOFT KG.1 A VERY GOOD SOFTNESS FOR PRINTING ON LIGHT GARMENTS

Clear soft base is used to achieve a softer feel of the final print.

It serves as an underlayer on light textiles and seals the fabric so that other colors are nicely applied on the textile and not into it.

The transparent base can also be used as a basis for preparing a mixture for printing glitter.

Additives for the Avantex line of silkscreen ink:

• VD01 for raster printing (max 2-5%)
• FAST 130– for flash drying (max 5%)
• WW for wet-on-wet (max 5-10%)
• 804 thinner – addition for printing transfers
• 60 FLEX to increase elasticity (max 10-15%)

The use of mesh from 43 to 140 threads/cm is recommended.
For preparing the screen for printing with plastisol inks, we recommend using universal emulsion Screencoat WHD.

WARNINGS:
Always test the resistance on a test piece before batch printing. Read and follow the safety instructions!