STRIPCOAT 110 emulsion remover

STRIPCOAT 110 emulsion remover

STRIPCOAT 110 RECLAIMING LIQUID CONCENTRATE 1:4 WATER LT.1

Stripcoat 110 is a concentrated cleaner for effectively removing emulsion.

Stripcoat 110 is used for screen washing after printing and is intended for preparing the screen for printing again. It easily removes the emulsion, but it does not remove ink and chemical residues.

Preparation: Mix the Stripcoat 110 concentrate with water in a 1:4 ratio. It can be used in soaking containers, or you can apply it on the screen with a sponge, leave it for a few minutes, and rinse thoroughly.

The perfect combination is ensured if Stripcoat 110 is used together with the cleaner Deterstrip 110If you mix both cleaners together in a 1:1 ratio, you get an excellent cleaner that simultaneously performs several tasks:

› removes emulsion,

› removes paint residues on the mesh and the frame,

› degreases the screen and breaks down all chemical residues that are in the paints and cleaners (they adhere to the mesh during printing).

Why is it important for the mesh to be clean and degreased?

› with a repeatedly used cleaned screen, the print will still be perfect,

› the emulsion adheres thoroughly to the entire surface where it is applied (does not detach),

› the paint passes more easily through the mesh,

› there are no issues during exposure if the screen is free of stains, which can be caused by poorly cleaned paint.

To prevent ghosting, we recommend using the ANTIGHOST additive, and for removing existing ghosting, use the two-component cleaner GHOSTCLEANER A and B.