Screen Cleaning

barve_pripomocki_tiskanje_na_majice_sitotisk_gajcom

Cleanliness and preparation of the screen are important, as they not only affect the final look of the print but also the time and nerves during printing. The better prepared the screen is, the fewer problems you’ll have during printing, and the more satisfied you’ll be.

Grafco Cleaners are intended for use during and after printing.

1. Removes even the most dried-on ink from the mesh
It happens too often that printing ink is not cleaned well enough after printing, resulting in the ink
drying on the printing mesh.
2. Removes burnt emulsion
They easily remove even the most burnt-on emulsion from the mesh, which regular cleaners
cannot.
3. Degreases the mesh
All screen washing agents are greasy, and if you don’t degrease the screens before reuse,
the emulsion won’t be applied evenly and optimally, which is a big factor for a perfect print.
4. They work on their own
Simply apply them to the screen, wait a few minutes, and rinse with water under pressure.
Now that your screens are clean and degreased, it’s time to prepare them for printing with top-quality

universal emulsion
WHD . You can use it for all types of screen printing inks (water-based, plastisol, solvent, UV, etc.). Simply mix it with the hardener and coat both sides of the screen.
While waiting for the image to be exposed, you can calmly prepare the printing material to which you
will add value with a quality print.
you will add value with a quality print.

Grafco cleaners for screen printers are friendly to people and the environment.

 

This site uses cookies to offer you a better browsing experience. By browsing this website, you agree to our use of cookies.