VINILSTAR COLORS

VINILSTAR COLORS

Vinilstar colors are solvent-based inks for printing on plastic. With an exceptional gloss effect, they provide the highest quality print.

Vinilstar PVC colors are highly pigmented, offering excellent coverage on both dark and transparent materials. Printing with them is straightforward, and they can be used directly from the original packaging.

We recommend them for printing on almost all plastic materials, aluminum, various metals, lacquered surfaces, and even thermally reshaped products. For printing on final products, you can use them on calendars, notebooks, folders, bags, plastic films, and much more.

For optimal and quick color preparation, the Grafco mixing system with tested recipes is available, achieving precise color matches with Pantone colors.

Recommended mesh for printing: 77 – 150

Recommended emulsion:
Screencoat WHD

Drying time for single-layer printed color:
At room temperature 20°C / 30-40 min or in the oven at 40°C / around 60 seconds

Drying time for multi-layer printing or when using retarders:
At room temperature 20°C / 24 hours or in the oven at 60°C – 70°C / around 60 minutes

Possibility of adding thinners or hardeners (10 – 30%) for better durability of the print on more demanding materials.

The colors are health-friendly, with a mild scent and free of added phthalates and silicone.

VINILSTAR CLEAR BASE HP

Vinilstar clear base is a vinyl/acrylic solvent transparent base for printing on plastic, paper, and cardboard.

The base is extremely easy to print and can be used directly from the original packaging, meaning you can print it independently as a varnish effect. To achieve gold or silver tones, you can use it as a base to which you can add gold powder or for a silver combination, silver aluminum powder (recommended ratio somewhere between 120 -150 g/kg).

We recommend it for printing on almost all plastic materials, aluminum, various metals, lacquered surfaces, and even for thermally reshaped products. For printing on final products, you can use it on calendars, notebooks, folders, bags, plastic films, and much more.

Recommended mesh for printing: 77 – 150

Recommended emulsion: Screencoat WHD

Drying time for single-layer printed color:
at room temperature 20°C / 30-40 min or in an oven at 40°C / around 60 seconds

Drying time for multi-layer printing or when using retarders:
at room temperature 20°C / 24 hours or in an oven at 60° – 70° / around 60 minutes

Possibility of adding diluents or hardeners (10 – 30%) for better durability of the print on more demanding materials.

Colors are health-friendly, with a mild smell and without added phthalates and silicone.