DETERSTRIP 111 cleanser for degreasing screens and removing ink

DETERSTRIP 111 – solvent for degreasing screens and removing ink

DETERSTRIP 111 RECLAIMING LIQUID CONCENTRATE 1:1 WATER LT.1

Deterstrip 111 is a concentrated cleaner for washing screens after printing, which removes paint residues and degreases or breaks down residual cleaning agents (chemicals).

The cleaner is very effective, ensuring that your screens are properly prepared for reuse.

Preparation: Mix Deterstrip 111 concentrate with water in a 1:1 ratio. Apply the prepared cleaning mixture to the screen with a sponge, leave it for a few minutes, and rinse thoroughly.

The perfect combination is ensured if Deterstrip 111 is used simultaneously with the cleaner. Stripcoat 110. If you mix both detergents together in a ratio of 1:1, you get an excellent cleaner that performs multiple tasks at the same time:

› removes emulsion,

› removes paint residues on the mesh and frame,

› degreases the screen and breaks down all chemical residues that are in paints and cleaners (they adhere to the mesh already during printing).

Why is it important that the mesh is clean and degreased?

› with a repeatedly cleaned screen, the print will still be perfect,

› the emulsion adheres thoroughly to the entire surface where it is applied (does not detach),

› the paint passes through the mesh more easily,

› there are no issues with exposure if the screen is free of spots, which can be a consequence of poorly cleaned paint.

To prevent the formation of ghosts, we recommend using the ANTIGHOST additive. To remove already formed ghosts, use the two-component cleaner GHOSTCLEANER A and B.