SCREEN CLEANING SOLVENT 105 FAST LT. 5

Solvent cleaner for cleaning during printing and for screens that you only want to clean and then reuse.

Suitable for cleaning all screen printing tools (squeegee holder, paint spatula, etc.). We recommend that you put the bulk of the paint into a cup after printing, clean smaller paint residues on the screen and frame with Cleaner 105.

The cleaner is fast-evaporating, non-greasy, and has a characteristic mild smell.

For air-drying paints, it is common that during printing, the mesh gets clogged (they dry out), resulting in an incomplete paint transfer – CLEANER 105 easily reopens the mesh, ensuring a flawless paint transfer.

Warning: SOLVENT 105 cleaner does not clean or remove emulsion from the screen and is not suitable as a screen washing cleaner.

SCREEN CLEANING SOLVENT 105 FAST LT. 5

Solvent cleaner for cleaning during printing and for screens that you only want to clean and then reuse.

Suitable for cleaning all screen printing tools (squeegee holder, paint spatula, etc.). We recommend that you put the bulk of the paint into a cup after printing, clean smaller paint residues on the screen and frame with Cleaner 105.

The cleaner is fast-evaporating, non-greasy, and has a characteristic mild smell.

For air-drying paints, it is common that during printing, the mesh gets clogged (they dry out), resulting in an incomplete paint transfer – CLEANER 105 easily reopens the mesh, ensuring a flawless paint transfer.

Warning: SOLVENT 105 cleaner does not clean or remove emulsion from the screen and is not suitable as a screen washing cleaner.

2 rolls with 500 sheets in the package

• 100% pure cellulose, which absorbs well and is strong enough for use in printing.
• blue color
• EU-Ecolabel
• dermatologically tested

Concentrated water-based cleaner.

DETERGENT 910 cleaner is suitable for industrial use in printing houses. It removes and cleans water-based inks without damaging the material (mesh, screen frame, etc.) and does not leave stains. It can be used as a degreaser on silicone surfaces before printing. It is recommended to dilute with water up to 20%.

Main characteristics:

DETERGENT 910 is a powerful cleaner that can remove any traces of grease or silicone from difficult printing surfaces for screen printing or any other printing process. This is an innovative water-based detergent, completely biodegradable, and extremely effective at cleaning any demanding surface before printing.

DETERGENT 910 is useful for cleaning screen printing meshes used with very demanding water-based inks. DETERGENT 910 resolves and removes dried old water-based ink from all printing devices or parts of printing machines in a few seconds. This product does not chemically affect the photoemulsion or polymers used in screen printing. In the printing process, it is very important to print on thoroughly cleaned surfaces to achieve better results with printed colors. Additionally, it is crucial to have a solution when facing contamination problems with grease or silicones on hard surfaces like glass, metals, stainless steel, or hard plastic. We usually suggest applying some 910 detergent to the surface with a hand spray, cleaning it, and wiping it with a clean cotton cloth. The process can also be repeated several times with a clean cotton cloth. DETERGENT 910, used in the aforementioned manner, dries very quickly and leaves no residues after two or three seconds, so you can print directly on the cleaned surface.

Dilution of concentrated 910 detergent: This detergent has the highest effectiveness when used as is. We suggest using it in its pure concentration for cleaning glass, stainless steel, metals, melamine, and hard plastics. In the case of cleaning and degreasing surfaces made from soft plastics or aluminum, we recommend diluting it with water – 1 part of 910 detergent to 4 or 5 parts of water.

Warning: This product can dissolve some plastics and metals in certain cases, so we suggest conducting some tests before use.

Pulitol gel for hand washing with dual action simultaneously removes dirt, screen printing ink residues, and takes care of your hands, leaving them with a pleasant fragrance.

It contains polymer grains that allow the removal of the most stubborn dirt such as lubricants, oils, tar, paints, inks, etc.

Features:

> for thorough cleaning and hand care,

> with glycerin to protect skin from drying out,

> phosphate-free,

> does not clog drains,

> dermatologically proven to be skin-friendly.

Usage:

Apply a small amount of Pulitol hand washing gel to your hands and rub well with a few drops of water. Once the dirt dissolves, rinse your hands thoroughly with water.

Packaging: 1 kg.

SCREEN CLEANING SOLVENT 105 FAST LT. 5

Solvent cleaner for cleaning during printing and for screens that you only want to clean and then reuse.

Suitable for cleaning all screen printing tools (squeegee holder, paint spatula, etc.). We recommend that you put the bulk of the paint into a cup after printing, clean smaller paint residues on the screen and frame with Cleaner 105.

The cleaner is fast-evaporating, non-greasy, and has a characteristic mild smell.

For air-drying paints, it is common that during printing, the mesh gets clogged (they dry out), resulting in an incomplete paint transfer – CLEANER 105 easily reopens the mesh, ensuring a flawless paint transfer.

Warning: SOLVENT 105 cleaner does not clean or remove emulsion from the screen and is not suitable as a screen washing cleaner.

DETERSTRIP 111 RECLAIMING LIQUID CONCENTRATE 1:1 WATER LT.1

Deterstrip 111 is a concentrated cleaner for washing screens after printing, which removes paint residues and degreases or breaks down residual cleaning agents (chemicals).

The cleaner is very effective, ensuring that your screens are properly prepared for reuse.

Preparation: Mix Deterstrip 111 concentrate with water in a 1:1 ratio. Apply the prepared cleaning mixture to the screen with a sponge, leave it for a few minutes, and rinse thoroughly.

The perfect combination is ensured if Deterstrip 111 is used simultaneously with the cleaner. Stripcoat 110. If you mix both detergents together in a ratio of 1:1, you get an excellent cleaner that performs multiple tasks at the same time:

› removes emulsion,

› removes paint residues on the mesh and frame,

› degreases the screen and breaks down all chemical residues that are in paints and cleaners (they adhere to the mesh already during printing).

Why is it important that the mesh is clean and degreased?

› with a repeatedly cleaned screen, the print will still be perfect,

› the emulsion adheres thoroughly to the entire surface where it is applied (does not detach),

› the paint passes through the mesh more easily,

› there are no issues with exposure if the screen is free of spots, which can be a consequence of poorly cleaned paint.

To prevent the formation of ghosts, we recommend using the ANTIGHOST additive. To remove already formed ghosts, use the two-component cleaner GHOSTCLEANER A and B.

STRIPCOAT 110 RECLAIMING LIQUID CONCENTRATE 1:4 WATER LT.1

Stripcoat 110 is a concentrated cleaner for effectively removing emulsion.

Stripcoat 110 is used for screen washing after printing and is intended for preparing the screen for printing again. It easily removes the emulsion, but it does not remove ink and chemical residues.

Preparation: Mix the Stripcoat 110 concentrate with water in a 1:4 ratio. It can be used in soaking containers, or you can apply it on the screen with a sponge, leave it for a few minutes, and rinse thoroughly.

The perfect combination is ensured if Stripcoat 110 is used together with the cleaner Deterstrip 110If you mix both cleaners together in a 1:1 ratio, you get an excellent cleaner that simultaneously performs several tasks:

› removes emulsion,

› removes paint residues on the mesh and the frame,

› degreases the screen and breaks down all chemical residues that are in the paints and cleaners (they adhere to the mesh during printing).

Why is it important for the mesh to be clean and degreased?

› with a repeatedly used cleaned screen, the print will still be perfect,

› the emulsion adheres thoroughly to the entire surface where it is applied (does not detach),

› the paint passes more easily through the mesh,

› there are no issues during exposure if the screen is free of stains, which can be caused by poorly cleaned paint.

To prevent ghosting, we recommend using the ANTIGHOST additive, and for removing existing ghosting, use the two-component cleaner GHOSTCLEANER A and B.

Ghost remover from mesh – two-component

GHOST CLEANER A LT.1

Cleaner for removing ghosts from screens, remnants of baked emulsion, and dried paint.

The cleaner is two-component and works only in combination of both (A+B):

› component A is a detergent that glazes the screen

› component B is a paste, which crystallizes in combination with the dry component A.

The combination of both components allows you to make old screens like new and you will print and print with them without interruption.

GHOST CLEANER PASTE B KG.1

Cleaner for removing ghosts from screens, baked-on emulsion residue, and dried ink.

The cleaner is a two-component product and works only as a combination of both (A+B):

› Component A is a detergent that creates a glaze on the screen

› Component B is a paste that crystallizes when combined with dry component A.

The combination of both components allows you to make old screens like new, enabling you to print continuously with them.

INSTRUCTIONS:

1. Using a sponge, apply component A to the dry screen.

2. Let it act at room temperature until it dries. The drying time depends on the mesh density.

3. Apply component B to dry component A using a squeegee.

4. Dry the screen at room temperature until crystallized, about 20/30 minutes (maximum 90 minutes).

5. After crystallization, thoroughly rinse the screen with a water jet.

TIPS:

› Always dry screens coated with components A or B in a horizontal position.

› Adhere to the approximate times (depending on the mesh – finer mesh requires less time, and vice versa); it is best to follow the crystallization process.

› Apply both components in a thin layer.

› Do not coat the mesh up to the frame, but rather leave a centimeter away where the tension is less.

WARNING:

The crystallization process is very intense and aggressive, so follow the manufacturer’s instructions and advice. In the worst case, the mesh may tear.